可降解一次性环保餐具生产有什么独到之处？

The main process of producing degradable disposable environmentally friendly tableware is to mix sugarcane pulp, bamboo pulp, etc. in proportion according to the order requirements. The mixing ratio of sugarcane pulp and bamboo pulp varies depending on the customer's requirements for the product. Firstly, soak sugarcane pulp and bamboo pulp in different proportions in a hydraulic pulper for about 5 minutes. Then, start the hydraulic pulper for crushing and dissolving. Dilute the crushed slurry in the mixing tank, add oil and waterproof agents during the dilution process, and the mixing tank mixer will stir the slurry evenly. Then, use a slurry pump to pump the diluted slurry into the slurry supply tank and continue stirring. This completes the pulping process.

将供浆池内的浆液用浆泵通过供浆管道输送到到一次性环保纸模自动生产线的成型机台，在成型机台上经过真空吸滤去掉浆液中的水分，使浆液中的纤维吸附在成型用的丝网上，形成湿胚，通过机械手将湿胚和丝网一起转移到热压定型机，在230左右温度和15吨左右压力下，用热压模具将湿胚中水分挤掉，并将湿胚烘干，形成半成品。

The slurry in the slurry supply tank is pumped through the slurry supply pipeline to the forming machine of the disposable environmentally friendly paper mold automatic production line. The moisture in the slurry is removed through vacuum filtration on the forming machine, allowing the fibers in the slurry to adsorb onto the forming wire mesh, forming a wet embryo. The wet embryo and wire mesh are transferred together to the hot pressing shaping machine by a mechanical arm. At a temperature of around 230 and a pressure of about 15 tons, the moisture in the wet embryo is squeezed out using a hot pressing mold, And dry the wet embryo to form a semi-finished product.

将定型后的半成品转移到切边岗位，通过切边机用切刀将多余边料去除。

Transfer the finalized semi-finished products to the edge cutting position and remove excess edge materials using a cutting knife through the edge cutting machine.

切边后产品转移到检验工序，检验工按照客户的标准进行检验，将不符合客户要求的产品挑拣出来，符合要求的产品转移到消毒包装工序，利用紫外线消毒机进行消毒，经过消毒的产品在封闭的无菌包装间包装后入库存放。

After trimming, the product is transferred to the inspection process. The inspector inspects according to the customer's standards, picking out products that do not meet the customer's requirements. Products that meet the requirements are transferred to the disinfection and packaging process, and disinfected using a UV disinfection machine. The disinfected products are packaged in a closed sterile packaging room and stored in the warehouse.

本文由 一次性环保餐具友情奉献.更多有关的知识请点击: //www.ucgmex.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is dedicated to the friendship of disposable environmentally friendly tableware. For more information, please click on: //www.ucgmex.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned